Broswse By Categlory

 

Broswse By Application

   

EVOTITE High performance ANAEROBIC ADHESIVE is a single component adhesive and cures in the absence of air. anaerobic also cures to form a rigid and durable film to prevent loosening out of vibration and leakage out of corrosion. The main features of anaerobic are thread locking, sealing and retaining the metal parts.
 

 

Direction:
1. Clean the bonded surface
s and make sure it is clean and free of grease.
2. Apply only small quantity of adhesive to one surface, or applied thoroughly to both bond surface
s if needed.
3. Can be accelerated with the use of EVOTITE activator P7649, promote the curing time.

 
 
SEALING SERIES

AA567

Medium strength and non-migration. Use for general purposes of pipe sealing in hydraulic and pneumatic systems. It is suitable for general tapes and straight tread pipes, instant seal and allow easy disassembly.

AA577

High strength. Apply to general-purpose pipe sealing, resistant for rough environment sealing and corrosion preventing.

 

FLANGE SEALING

AA510

Allows to work under temperature can go up to 200 C and facilitate screening, chemical resistance and rigid gasket. Ideally designed for perfect load transfer and stress distribution across flanges. Allows clamping loads to ensures no leak assemble with fill gap of 0.25mm.

AA515

Universal grade for general purposes. Will perform a flexible gasket sealant which can tolerate flange movements caused by vibrations. Very high viscosity enables to work on vertical surfaces without dripping.

AA518

Will form a flexible gasket sealant and conform to the rough surfaces caused by tool marks on flanges. Allows an aluminum alloy coating to fit the metal part without re-torque on mechanical gaskets. The joint parts of integrity can be easily disassembled after having been tightly sealed.

 

Click on the "grades" you are interested in, they will be added to the inquiry list automatically.. (Click here to send out the inquiry. )

SEALING SERIES

Grade

Color

Viscosity(CPS)
GB/T2794-1995

Density
(g/cm3)

Max.

Diameter
That can be sealed

Average Disassemble Torque(N.m)

Max. Sealing Pressure(Mpa)

Work Temp.
(℃)

Fixing
time
(min)

Full
Curing
Time (h)

AA567

White

260000~

750000

1.10

M80

3.0

71.0

-60~

210

120

24

AA577

Yellow

50000~

150000

1.09

M80

6.0

70.5

-60~

150

30~60

24

 

FLANGE SEALING SERIES

Grade

Color

Viscosity(CPS)
GB/T2794-1995

Density
(g/cm3)

Max. Gap Fill
(mm)

Fixing time
(min)

Full Curing
Time (h)

Work Temp.
(℃)

AA510

pink

250000~750000

1.10

0.25

2~3

72

-60~200

AA515

pink

150000~375000

1.10

0.25

1~2

24

-60~150

AA518

pink

500000~1000000

1.10

0.25

3~4

24

-60~150

 

 

 
 
 

EVOTITE ADHESIVES CO., LTD.

China

TEL: 86-750-5623286

FAX: 86-750-5620116

TaiWan:

TEL: 886-7-6430866

FAX: 886-7-6410501

E-mail: evotite@tongshen.com.tw  Privacy Policy