|
EVOTITE special CYANOACRYLATE ADHESIVES is especially formulated for industry
applications, and achieve superb adhesion effect to suit different working conditions, with wealth of knowledge.
Especially to plastic, porous surface, low blooming application.
EVOTITE CA409/CA416/CA420/CA495
Medium setting velocity for plastic, metal & rubber adhesion.
 |
| |
|
Click on the "grades" you are interested in, they will be added to the inquiry list
automatically.. (Click here to send out the inquiry. )
|
Grade |
Viscosity
(CPS) |
Gap Fill
(mm) |
Setting Viscosity
(Sec.) |
Appearance |
Tensile-Shear
Strength (kgf/cm2) |
Temperature
Range |
|
CA409 |
Gel |
1 |
30 |
Transparence |
180-220 |
-55~82°C |
|
CA416 |
1500 |
0.2 |
20 |
Transparence |
160-200 |
-55~82°C |
|
CA420 |
2-3 |
0.04 |
10 |
Transparence |
160-200 |
-55~82°C |
|
CA422 |
2500 |
0.25 |
15-30 |
Transparence |
160-200 |
-55~82°C |
|
CA495 |
50 |
0.06 |
20 |
Transparence |
160-200 |
-55~82°C |
Direction:
1.Bonding surfaces should be clean, and EVOTITE Primer should be applied firstly for metal, while alcohol should be applied for plastic.
2.Apply suitable quantity of glue to the bonding surface, and the glue will be cured after pressing 5-10 seconds.
3.Superfluous of glue will slow down the velocity and reduce the strength, while the use of automatic dispensing machine is acceptable.
|
 |
